EMMA DESK CHAIR
£878.00
A comfortable and firm desk chair, slightly wider than its side chair counterpart, that suits both a traditional and contemporary setting. The classic Emma comes with upholstered arms that are slightly lower than a standard carver, making it incredible comfortable as well as adding the advantage of easily fitting under the table. Also available fully deep buttoned.
DIMENSIONS
Height 88 – 96cm x Seat width 62cm x Seat depth 48cm
DELIVERY
The lead time is 6 — 8 weeks from payment of deposit.
FABRIC / UPHOLSTERY
The Emma desk chair requires 3 M of plain fabric, which we can order for you or you can send to our showroom. If your chosen fabric has a pattern repeat, more may be needed. Once the fabric has been decided upon, or if you are using more than one fabric, we will advise quantity required.
A Fire Retardant Barrier Cloth is required with most fabrics at a cost of £40.
FINISH
The Emma desk chair is handmade to order in England with standard beech legs, stained to your specification. We have a variety of wood stains to choose from – please specify finish required. There are two options of base to choose from and it is also available fully deep buttoned.
Our dining chairs are available with Oak, Walnut or Mahogany legs at an additional 25% charge.
We offer different nail colour and size options, should you decide to finish your desk chair with nailing. Please specify the finish trim you require – piping, nailing, seams, buttoning etc.
Related Products
ALEXA
A sleek and stylish dining chair with a vent which is often chosen for a more contemporary setting. The cut-out in the upper back of the chair not only looks good but also makes it easier to move. The Alexa has a show wood base and slim line tapered legs, adding to its sleek design. Chrome nailing works well with this modern upholstered dining chair and complements its clean lines.
DIMENSIONS
Height 93cm x Seat width 47cm x Seat depth 44cm x Seat height 47cm
DELIVERY
The lead time is 6 — 8 weeks from payment of deposit.
FABRIC / UPHOLSTERY
The Alexa dining chair requires 1.5 M of plain fabric, which we can order for you or you can send to our showroom. If your chosen fabric has a pattern repeat, more may be needed. Once the fabric has been decided upon, or if you are using more than one fabric, we will advise the quantity required.
A Fire Retardant Barrier Cloth is required with most fabrics at a cost of £40.
ALEXA CARVER
The Alexa dining chair is also available with arms as a carver at the cost of £800.00 and requires 2.00 M of plain fabric. Please enquire about dimension changes.
FINISH
The Alexa dining chair is handmade to order in England with standard beech legs, stained to your specification. We have a variety of wood stains to choose from – please select finish required. Alternatively, you can provide us with a wood sample and we will do our best to match it.
Our dining chairs are also available with Oak, Walnut or Mahogany legs at an additional 25% charge.
We offer different nail colour and size options, should you decide to finish your chair with nailing. Please specify the finish trim you require – piping, nailing, seams etc.
To view wood and nail options click here>
PRINT DETAILS
Click here to print Alexa dining chair details>
ANTONIA
High back dining chair with the back slightly ‘S’ shaped offering additional lumber support, comfort and style. The Antonia is designed to blend in with traditional or modern surroundings.
DIMENSIONS
Height 110cm x Seat width 50cm x Seat depth 44cm x Seat height 49cm
DELIVERY
The lead time is 6 — 8 weeks from payment of deposit.
FABRIC / UPHOLSTERY
The Antonia high back dining chair requires 1.5 M of plain fabric, which we can order for you or you can send to our showroom. If your chosen fabric has a pattern repeat, more may be needed. Once the fabric has been decided upon, or if you are using more than one fabric, we will advise the quantity required.
A Fire Retardant Barrier Cloth is required with most fabrics at a cost of £40.
ANTONIA CARVER
The Antonia dining chair is also available with arms as a carver at the cost of £650.00 and requires 2.00M of fabric. Please enquire about dimensions changes.
FINISH
The Antonia dining chair is handmade to order in England with standard beech legs, stained to your specification. We have a variety of wood stains to choose from – please select finish required. Alternatively, if you provide us with a wood sample, we will do our best to match it.
Our dining chairs are also available with Oak, Walnut or Mahogany legs at an additional 25% charge.
We offer different nail colour and size options, should you decide to finish your dining bench with nailing.
Please specify the finish trim you require – piping, nailing, seams etc.
BLAKE
Contemporary, sleek and stylish dining chair with a cut out lower back and rounded upper back and tapered legs. The bold Blake chair is a cornerstone of our modern collection with plenty of personality and is often chosen for homes featuring an open layout, in which the kitchen, dining area and sitting room are connected into a larger open space – making it conducive to entertaining guests.
DIMENSIONS
Height 84cm x Seat width 52cm x Seat depth 50cm x Seat height 49cm
DELIVERY
The lead time is 6 – 8 weeks from payment of deposit.
FABRIC / UPHOLSTERY
The Blake dining chair requires 2 M of plain fabric, which we can order for you or you can send to our showroom. If your chosen fabric has a pattern repeat, more may be needed. Once the fabric has been decided upon, or if you are using more than one fabric, we will advise the quantity required.
A Fire Retardant Barrier Cloth is required with most fabrics at a cost of £40.
FINISH
The Blake is handmade to order in England with standard beech legs stained to your specification. We have a variety of wood stains to choose from – please select finish required. Alternatively, you can provide us with a wood sample and we will do our best to match it.
Our dining chairs are also available with Oak, Walnut or Mahogany legs at an additional 25% charge.
We offer different nail colour and size options, should you decide to finish your chairs with nailing. Please specify the trim finish you require – piping, nailing, seams etc.
BYRON CHAIR
The Byron is part of our modern dining room furniture range, featuring clean lines and designed for comfortable urban living. This sleek and compact low back dining chair with a show wood base helps create a space that is stylish as well as comfortable.
DIMENSIONS
Height 83cm x Seat width 47cm x Seat depth 43cm x Seat height 49cm
DELIVERY
The lead time is 6 — 8 weeks from payment of deposit.
FABRIC / UPHOLSTERY
The Byron low back dining chair requires 1.5 M of plain fabric, which we can order for you or you can send to our showroom. If your chosen fabric has a pattern repeat, more may be needed. Once the fabric has been decided upon, or if you are using more than one fabric, we advise quantity required.
A Fire Retardant Barrier Cloth is required with most fabrics at a cost of £40.
BYRON CARVER
The Byron dining chair is also available with arms as a carver at the cost of £669.00 and requires 2.00M. Please enquire about dimensions changes.
FINISH
The Byron dining chair is handmade to order in England with standard beech legs, stained to your specification. We have a variety of wood stains to choose from – please select finish required. Alternatively, you can provide us with a wood sample and we will do our best to match it.
Our dining chairs are also available with Oak, Walnut or Mahogany legs at an additional 25% charge.
We offer different nail colour and size options, should you decide to finish your chair with nailing. Please specify the finish trim you require – piping, nailing, seams etc.
CADOGAN
Wing back dining chair with an hourglass shaped back and button detail to the inside back. The back legs are tapered and the front legs are gently curved, making this a stylish chair that would equally suit a traditional or more contemporary setting. Seen here with oak legs in a light limed wash, the Cadogan suits bold and plain fabrics well.
DIMENSIONS
Height 93 x Seat width 52 x Seat depth 44 x Seat height 47cm
DELIVERY
The lead time is 6 — 8 weeks from payment of deposit.
FABRIC / UPHOLSTERY
The Cadogan hourglass back dining chair requires 2.00 M of plain fabric, which we can order for you or you can send to our showroom. If your chosen fabric has a pattern repeat, more may be needed. Once the fabric has chosen, or if you are using a combination of fabrics, we will advise quantity required.
A Fire Retardant Barrier Cloth is required with most fabrics at a cost of £40.
CADOGAN CARVER
The Cadogan is also available with wooden arms as a carver, which gently curve outwards, forming a comfortable arm rest at the cost of £821.00 and requires 2.50 M.
FINISH
The Cadogan dining chair is handmade to order in England with standard beech legs, stained to your specification. We have a variety of wood stains to choose from – please select finish required. Alternatively, you can provide us with a wood sample and we will do our best to match it.
All our chairs are available with Oak, Walnut or Mahogany legs at an additional 25% charge.
We offer different nail colour and size options, should you decide to finish your chair with nailing. Please specify the finish trim you require – piping, nailing, seams etc.
CAMERON
The Cameron dining chair has a low vented back. Its sleek lines give it a distinctive contemporary character allowing it to be placed alongside a large variety of tables, which are not necessarily modern. Here, the crisp white linen contrast piping accentuates the cut out back.
DIMENSIONS
Height 85cm x Seat width 48cm x Seat depth 45 x Seat height 49cm
DELIVERY
The lead time is 6 — 8 weeks from payment of deposit.
FABRIC / UPHOLSTERY
The Cameron vent back dining chair requires 1.5 M of plain fabric, which we can order for you or you can send to our showroom. If your chosen fabric has a pattern repeat, more may be needed. Once the fabric has been chosen, or if you are using more than one fabric, we will advise quantity required.
A Fire Retardant Barrier Cloth is required with most fabrics at a cost of £40.
CAMERON CARVER
The Cameron is also available as a carver with upholstered arms forming a comfortable arm rest at the cost of £801.00 and requires 2.00 M. Please enquire about dimension changes.
FINISH
The Cameron dining chair is handmade to order in England with standard beech legs, stained to your specification. We have a variety of wood stains to choose from – please select finish required. Alternatively, you can supply us with a wood sample and we will do our best to match it.
Our chairs are also available with Oak, Walnut or Mahogany legs at an additional 25% charge.
We offer different nail colour and size options, should you decide to finish your chair with nailing. Please specify the finish trim you require – piping, nailing, seams etc.
CATHARINA
The Catharina high scroll back dining chair in it’s various guises, crosses the divide between contemporary and a traditional dining chair. With painted legs and upholstered in a contemporary fabric, it would be at home in a country farm house kitchen as a London family dining area. Given a more traditional velvet and nailing, we have seen the chair placed in a sumptuous dining room. It is one of our favourites and is chameleon like in its ability to adapt to its surroundings.
DIMENSIONS
Height Xcm x Seat width Xcm x Seat depth Xcm x Seat height Xcm
DELIVERY
The lead time is 6 — 8 weeks from payment of deposit.
FABRIC / UPHOLSTERY
Please enquire
CATHARINA CARVER
The Catharina dining chair is also available with arms as a carver. Please enquire about dimensions changes.
FINISH
The Catharina scroll back dining chair is handmade to order in England with standard beech legs, stained to your specification. We have a variety of wood stains to choose from – please select finish required. Alternatively, you can provide us with a wood sample and we will do our best to match it.
Our dining chairs are also available with Oak, Walnut or Mahogany legs at an additional 25% charge.
We offer different nail colour and size options, should you decide to finish your chair with nailing. Please specify the finish trim you require – piping, nailing, seams etc.
CHARLES
A classic style dining chair for traditional and contemporary interiors. The Charles has deep buttoning and a curved back that wraps around the chair, adding to its comfort.
DIMENSIONS
Height 94cm x Seat width 54cm x Seat depth 43 x Seat height 48cm
DELIVERY
The lead time is 6 — 8 weeks from payment of deposit.
FABRIC / UPHOLSTERY
The Charles curve back dining chair requires 2 M of plain fabric, which we can order for you or you can send to our showroom. If your chosen fabric has a pattern repeat, more may be needed. Once the fabric has been decided upon, or if you are using more than one fabric, we will advise the quantity required.
A Fire Retardant Barrier Cloth is required with most fabrics at a cost of £40.
CHARLES CARVER
The Charles is also available with upholstered arms as a carver, which gently curve outwards, forming a comfortable arm rest at the cost of £768.00 and requires 2.50M of plain fabric. Please enquire about dimension changes.
FINISH
The Charles dining chair is handmade to order in England with standard beech legs, stained to your specification. We have a variety of wood stains to choose from – please select finish required. Alternatively, you can provide us with a wood sample and we will do our best to match it.
Our dining chairs are available with Oak, Walnut or Mahogany legs at an additional 25% charge.
We offer different nail colour and size options, should you decide to finish your chair with nailing. Please specify the finish trim you require – piping, nailing, seams etc.